electron beam evaporation meaning in Chinese
电子束蒸发
Examples
- The best annealing condition of the zno films grown by electron beam evaporation technique was achieved
采用电子束蒸发的方法在si衬底上生长zno薄膜，通过退火实验，得到了最佳的退火条件。 - In this paper , high quality transparent and conductive al - doped zno thin films on quartz substrates are prepared by electron beam evaporation technique
本文采用电子束蒸发方法在石英衬底上制备出质量较好的al掺杂的zno薄膜材料。 - Tungsten oxide and nickel oxide films were prepared by electron beam evaporation method , and the effect of annealing techniques of the electrochromic properties of these films was discussed
本论文利用电子束蒸发方法制备氧化钨、氧化镍薄膜的基础上，研究了热处理工艺对于薄膜电致变色性能的影响。 - Study on the fabricating method the fe / al2o3 / fe mtj and co / al2o3 / feni mtj are prepared by ion - beam sputtering systems . the fexcu ( 1 - x ) granule films were evaporated directly using a high vacuum electron beam evaporation . some samples of granule films are annealed at 340c
用高真空镀膜机制备了fe _ xcu _ ( ( 1 - x ) )系列颗粒膜，并对部分膜做了加热退火处理，样品被加热到340并且保温2小时。 - 1 . the manganin ultra - high pressure sensors for gas gun were made by two - step thin film techniques , namely , manganin thin films were first deposited by magnetron sputtering on a12o3 substrates , and then covered by a layer of a12o3 thin films by electron beam evaporation
首次采用全薄膜化工艺制作气炮用锰铜超高压力传感器，即首先在绝缘基板上沉积锰铜敏感薄膜，然后再在敏感膜的上面沉积绝缘封装薄膜。